Feature
- property designed built-in 150W driver saves external power supply and extends connection
- perperty designed built-in DMX controller, directly connecting DMX console
- stretchable housing extends highlight on achitectural objectives
- enormous light delivering effects
- high waterproof performance

Electrical specifications
Input voltage : AC100-240V/50-60Hz
Input current : 2A Max
Power : 150 W
PF≥0.9
Control Mode:DMX512

XL-150-AW-RGB-01:
This model has built-in program (9 patterns) and can be used independently, and user can set up the DMX address ( the address is 5,6,7 in default setting). User needs a Signcomplex USB DMX INTERFACE to set the address.
When the model is used independently, the built-in program will be performed ( the programs can be customized according to the customers’ demand )

Standard built-in programs are as below:
1, red color gradual changing
2, green color gradual changing
3, blue color gradual changing
4, yellow color gradual changing
5, purple color gradual changing
6, cyan color gradual changing
7, white color gradual changing
8, seven colors jumping in turn
9, RGB gradual changing
If connecting with a programmable Master DMX controller, such as Master controller, DMX console or USB DMX Interface, the model can have various effects like synchronous changing, dimming, chasing etc..

XL-150-AW-RGB-02:
This model does not have built-in program. User does not need to set up the DMX address. The model must work with an ordinary Master DMX controller which is available in market. If the Master controller is programmable, it enables the user to program various effects like synchronous changing, dimming, chasing etc.

LED type : Edison 3 in 1 RGB LED
LED Quanty:48 LED
Beam angle : 25^o or 38^o
Housing : Aluminum + tempered glass
Rate : IP 65
Operating Temperature:-10℃ - 40℃
Storage Temperature: -20℃ - 60℃
Protection against electric shock: level Ⅰ
GW:10.2kg
NW:9kg

Dimensions (Unit: mm/inch)

specifications

Controller Connection Diagram

Installation Diagram
1.Drilling on the installation wall or ground, fix it tight.
2.Adjust it to the proper height by stretching.
3.Tight up the screw by large hex wrench.
4.Turn the light to the needed direction.
5.Tight up the screw by small hex wrench.
6.Check whether installation is firm, if not repeat the
step 3, and step 4. Then complete the installation.

Signcomplex Limited Warranty
Signcomplex warrants this product (“Product”) against defects in material or workmanship for a period of three years from the date of purchase. If this Product is determined to be defective, Signcomplex will repair or replace the Product,at its option.This warranty does not cover cosmetic damage or damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or modification of , or to any part of the Product. This warranty does not cover damage due to improper operation or maintenance, connection to improper voltage supply , or attempted repair by anyone than a facility authorized by Signcomplex to service the Product.

Repair or replacement as provided under this warranty is the exclusive remedy of the customer. Signcomplex shall not be liable for any incidental or consequential damages for breach of any express or implied warranty on this Product except to the extent prohibited by applicable law, any implied warranty of merchantability or fitness for a particular purpose on this Product is limited in duration to the duration of this limited warranty.

Some states do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from state to state.

Only Signcomplex may change, amend or modify the terms of this Limited Warranty and any such change , amendment or modification shall be in writing and is sued by Signcomplex . To obtain warranty service and shipping information call +86 755 2760 8650 or e-mail info@signcomplex.com .You must provide proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the Product is within the warranty period to obtain warranty service. Consumers have legal rights under applicable national legislation governing the sale of consumer goods. Such rights are not affected by the warranties provision outlined in this document.